Roper-Whitney No. 218 Bench Top Deep Throat Punch

This accurate punch is ideal for prototype, short production runs and model shops.  The adjustable die shoe permits the proper alignment of close fitting punches and dies to accomodate very thin materials, as well as heavier stock.  The option of a cabinet base and a 12" square gauge work table extends the usefulness of this punch and standard equipment is provided as indicated below.

Standard Equipment Includes:

• One (1) L8 punch holder
• One (1) No. 20 die adapter
• One (1) No. 40 die adapter
• One (1) 118 - 2-3/4" die shoe
• Stripper arms
• One (1) A6 stripper plate (1/2" maximum punch)
• One (1) 1/2" round punch and die

Specifications:

• Throat Depth: 12-1/4"
• Height of Throat with work table: 2-3/4"
• Length of stroke: 3/4"
• Slug hole clearance: 2-1/4"
• Diamter of punch shank hole in ram: 1"
• Linear hand operation
• Work heavy to ultra light materials
• Maximum rated capacity: 4 Tons*

*Refer to the tonnage chart located in our Techinal Information Section to determine if the rated capacity of this tool will accommodate the type and thickness of metal and the size and shape hole you will be punching.  DO NOT, UNDER ANY CIRCUMSTANCE, EXCEED THE RATED CAPACITY OF THIS TOOL.

Optional Equipment:

• B6 Stripper Plate (1" Maximum Punch)
• C6 Stripper Plate (2" Maximum Punch)
• 12" X 12" Gauge Work Table
• Cabinet Base

Addtional Punch and Dies are avaiable in different shapes and sizes.  Refer to the chart below for shapes and size capacities for the No. 218 Bench Punch: