Product Details
Ellis 9400 18.5" DRILL PRESS
Infinitely Variable Speed
Features
-
Variable speed from 0 to 1200 rpm
-
Adjust speeds while operating in the material
-
High torque at low rpm speeds
-
Instantaneous reversing for tapping
-
Tapping head is not needed
-
Machine tap goes into ball bearing chuck
-
Can tap either left or right handed threads
-
Drill head and table rotate 360° around column
-
Smooth operating table raiser
-
Fully enclosed spindle
-
Quill lock and depth control
-
Same ball bearing chuck holds both drill and tap
Speed control
-
Continuous speed adjustment while in operation
-
Instantaneous reversing for tapping
-
One turn on knob for adjusting speed (0 to 1200 rpm)
| Specifications | Ellis 9400 Drill Press |
| Motor | 2 HP A.C. Single Phase-Choose 110/220V |
| Control box | - Infinitely variable speed with a turn of the dial
- Instantaneous electronic reversing
- Full torque at low speeds
- All solid state circuitry
- Continuous speed adjustment while in operation
|
| Spindle speeds | 0 – 1200 RPM |
| Drills to center | 18 1/8” |
| Drilling capacity | Steel 1 1/16”
Cast Iron 1 1/4” |
| Tapping capacity | 3/4” |
| Morse taper | No. 3 |
| Quill diameter | 3” |
| Column diameter | 4” |
| Spindle Travel | 5 3/8” |
| Spindle toTtable (Max.) | 27 1/4” |
| Spindle to Base | 46 1/4” |
| Shipping Weight | 675 lbs |
| Table | Production Type:
T- Slotted 15 7/8” X 17 7/8”
2 Slots for 1/2” T-Bolts
Ground Working Surface
Coolant Trough |
| Base | T- Slotted
16 3/8” x 26 5/8”
2 Slots for 1/2” T-Bolts
Ground Working Surface |
| Size | Height 69 1/2”
Width 20”
Depth 29” |
| | |
Power Down Feed
Ball Bearing Chuck
Drill Press Vise
Round Table |
*Part #9500 Shown
Cart Contents:
