|
Ellis 9500 DRILL PRESS 20 in
Infinitely Variable Speed
Features
- Variable speed from 0 to 1200 rpm
- Digital RPM readout
- Adjust speeds while operating in the material
- High torque at low rpm speeds
- Instantaneous reversing for tapping
- Tapping head is not needed
- Machine tap goes into ball bearing chuck
- Can tap either left or right handed threads
- Drill head and table rotate 360° around column
- T-slotted production table raises & lowers effortlessly
- Fully enclosed spindle
- Quill lock and depth control
- Same ball bearing chuck holds both drill and tap
Speed control
- Continuous speed adjustment while in operation
- Instantaneous reversing for tapping
- One turn on knob for adjusting speed (0 to 1200 rpm)
| Specifications |
Ellis 9500 Drill Press |
| Motor |
2 HP D.C. Plug in 220 Single Phase or
1 1/2 HP A.C. Single Phase-choose 110/220 |
| Control Box |
- Infinitely variable speed with a turn of the dial
- Instantaneous electronic reversing
- Full torque at low speeds
- All solid state circuitry
- Continuous speed adjustment while in operation
|
| Spindle Speeds |
0 – 1200 RPM |
| Drills To Center |
20” |
| Drilling Capacity |
Steel 1 1/16”
Cast Iron 1 1/4” |
| Tapping Capacity |
3/4” |
| Morse Taper |
No. 3 |
| Quill Diameter |
2 1/8” |
| Column Diameter |
4” |
| Spindle Travel |
5 1/8” |
| Spindle To Table (max.) |
26 1/2” |
| Spindle To Base |
48 1/8” |
| Shipping Weight |
500 lbs |
| Table |
Production Type:
T- Slotted 16 5/8” X 18 5/8”
2 Slots for 1/2” T-bolts
Ground Working Surface
Coolant Trough
|
| Base |
T- Slotted
18” X 25 1/2”
2 Slots for 1/2” T-Bolts
Ground Working Surface |
| Size |
Height 70 1/2”
Width 20”
Depth 34 1/4” |
|
