IMPORTANT NOTE: You MUST preload the spring to a minimum of 1/2". Manufacturers rate springs with a higher preload. The higher the preload, the higher the spring rate because the end coils start to touch, effectively shortening the spring. Without adequate preload, readings may be inconsistant. Coil springs - even the best quality - can vary as much as 5% from the stated rate. This is normal manufacturing tolerance.
At this time, products in this category are not available online. If you aren't finding what you need, give us a call at 800-221-RACE or send us an email through the Contact Us form. We will do our best to get you what you need fast, and save you a little money in the process.
