|
Roper Whitney 12ft X 10GA Hydraulic Sheet Metal Shear - Heavy-duty welded frame and removable front panels allow units to be moved by forklift plus lift rings on top of units of hoisting shears with slings.
- Standard electric motor and hydraulic pump system assures reliable performance and convenient maintenance.
- Hinged front and side panels open for easy access to motor/pump systems.
- Variable speed back gauge has an easy-to-reach push button control on the front side of the shear for more efficient operation.
- Adjustable rake eliminates curl and twist in cutting.
- 4' side-squaring arm with recessed scale and fixed stop. Optional swing stop available.
- Four-edge HCHC blades produce clean, true cuts.
- Optional overhead light beam for precise shearing on scribed line.
- Fully guarded foot switch on 10" cord for remote operation (can be unplugged).
- "Safety yellow" finger guard on front and see through guard on top for maximum operator safety.
- Electrical disconnect and controls meet ANSI standards.
10 GAUGE SPECIFICATIONS/12 GA. STAINLESS STEEL
Common to all models
Maximum cutting capacity (mild steel) - 10 gauge
Back gauge extension-36"
Front to back dimension with gauging-96"
Height-54"
Table Height-32"
Strokes per minute-20 (maximum rake angle and full stroke)
Working pressure-2,200 p.s.i.
Voltage-Standard 230v, 3 phase, 60Hz (with 110V control circuit)-Optional 208 or 440V, 3 phase
| MODEL | 10H5 | 10H6 | 10H8 | 10H10 | 10H12 | | Cut Length | 5' | 6' | 8' | 10' | 12' | | Length (overall) | 7' | 8' | 10' | 12' | 14' | | Est.ship wt. (lbs.) | 4,700 | 6,700 | 7,700 | 8,750 | 13,000 | | Horsepower | 5 | 10 | 10 | 10 | 10 | | Strokes per Minute | 35 | 35 | 32 | 30 | 26 |
|
