|
Roper-Whitney No. 16 Maedium Duty Bench Punch
IDEAL FOR PUNCHING SPRING STEEL! (THE PUNCHES MUST BE HARDENED FROM THE FACTORY FOR A MINIMAL UPCHARGE.)
This medium duty bench punch is very similiar in operating design and capacity to the medium duty roler bearing portable punches offered from Roper-Whitney. However, in addition to stationary mounting, it also provides greater throat deminsions and a slightly broader range of punch and die sizes. Includes one 9/32" round punch and die. (NO SUBSTITUTIONS)
Specifications:
- Throat Depth: 3-1/4"
- Solid Forged Frame
- Adjustable Die Shoe allows the proper alignment of close fitting punches and dies to punch light gauge materials
- Maximum rated capacity: 7.3 Tons*
*Refer to the tonnage chart located in our Technical Information Section to determine if the rated capacity of this tool will accomodate the type and thickness of metal and the size and shape hole that you will be punching. DO NOT, UNDER ANY CIRCUMSTANCE, EXCEED THE RATED CAPACITY OF THIS TOOL.
Optional Equipment:
Additional Punch and Dies are available in different shapes and sizes. Refer to the chart below for shapes and size capacities for the No. 16 Medium Duty Bench Punch:
|
