|
ELECTRIC OVER HYDAULIC 180 DEGREE BENDER w/o DIES If you have been looking for a production hydraulic bender, this is it. It is a HIGH quality bender for the serious professional. Completely hand fabricated from solid plate and tubular steel. Capable of bending round or square tubing, and solid round, square, flat and 1/2” bar stock. The bender is self contained 110V AC, 1-1/2 H.P. 4 ton hydraulic - all built on a caster mounted base with a storage shelf for accessories. Bending capacity is from 1/2” OD x 2” radius to 2” O.D. x 6” radius with optional (Hossfeld) die sets . Bends to 180°. Bender base and fame work are un-painted steel. Dimensions are 38” high x 34” long x 24” wide. Shipping weight: 350 lbs This bender uses Hossfeld dies.
|
