| |
 |
IS2-PIN-1 |
 |
Saddle Pin
Replacement Saddle Pin for Irvan-Smith, Inc. Tubing Bender |
$6.00 |
|
| |
 |
IS2-PIN-2 |
|
Yoke/Shoe Pin
Replacement Yoke/Shoe Pin for Irvan-Smith, Inc. Tubing Bender |
$7.50 |
|
| |
 |
IS2-PIN-3 |
|
Roller Pin
Replacement Roller Pin for Irvan-Smith, Inc. Tubing Bender |
$15.00 |
|
| |
 |
IS2-S4882 |
|
OTC Hose End
Replacement OTC Hose End for Irvan-Smith, Inc. Tubing Bender |
$20.00 |
|
| |
 |
IS2-54345 |
|
Ram Seal Kit - Simplex
Simplex Ram Replacement Seal Kit for Rebuilding Irvan-Smith, Inc. Tubing Bender Ram |
$25.00 |
|
| |
 |
IS2-MB-JK |
|
8 Ton Hydraulic Replacement Jack
Replacement 8 Ton Hydraulic Bottle Jack for Manual Bender |
$35.00 |
|
| |
 |
IS2-S4557 |
|
OTC 10T Hydraulic Hose 6'
Replacement OTC 10 Ton Hydraulic Hose (6' Long) for Irvan-Smith, Inc. Tubing Bender |
$45.00 |
|
| |
 |
IST-370-FH |
|
Imperial Triple Head Tube Bender
Triple head, hand-held bender bends up to 180 degrees the following sizes: 3/16", 1/4", 3/8" and 1/2" |
$49.95 |
|
| |
 |
IS2-1719 |
|
Bender Clevis w/Threaded Rod
Attaches Shoe to Ram on the Irvan-Smith, Inc. Tubing Bender (Includes threaded rod for ram attachment) |
$75.00 |
|
| |
 |
LOW-L34TB |
 |
TUBING BENDER - 3/4 in MANUAL
3/4 in Tubing Bender |
$155.00 |
|
| |
 |
IS2-S5522 |
|
Simplex Industrial Ram
Replacement Simplex Hydraulic Ram for Irvan-Smith, Inc. Tubing Bender |
$195.00 |
|
| |
 |
IS2-S4562 |
|
OTC 10 Ton Pump-4020
Replacement OTC 10 Ton Pump for Irvan-Smith, Inc. Tubing Bender |
$300.00 |
|
| |
 |
IS2-MB-01 |
|
Manual Bottle Jack Bender
Less expensive than power benders and makes nice clean bends. Perfect for the shop at home or to transport to job sites. |
$509.00 |
 |
| |
 |
IS2-01-TB |
|
TUBING BENDER - ISI PNUEMATIC
This fully portable tubing bender makes accurate, smooth bends without kinking , wrinkling or crushing. This tubing bender is air operated...develops up to 10,000 PSI and bends 3/4" through 2" O.D. Tubing |
$1,295.00 |
|
| |
 |
IS2-TSP-1-0001 |
 |
Commercial Electric/Hydraulic Power Unit
Commercial Electric/Hydraulic Power Unit ONLY - BENDER NOT INCLUDED |
$2,089.00 |
Call To Order |
| |
 |
IS2-TSA-2-1-0004 |
|
Tube Shark Bench Mounted Pneumatic/Hydraulic
Bench Mounted Tube Shark with Pneumatic/Hydraulic Power Unit |
$2,620.00 |
Call To Order |
| |
 |
IS2-HB-01 |
 |
TUBING BENDER - HY-BEND ELEC/HYD 180 DEG
ELECTRIC OVER HYDAULIC 180 DEGREE BENDER w/o DIES |
$3,050.00 |
Call To Order |
| |
 |
IS2-TSA-2-1-0002 |
|
Tube Shark Bender Pneumatic/Hydraulic
Includes Pneumatic/Hydraulic Power Unit |
$3,600.00 |
Call To Order |
| |
|
IS2-TSA-2-1-0003 |
|
Tube Shark Bender Electric/Hydraulic
Includes Commercial Electric/Hydraulic Power Unit
Picture shows only the Electric/Hydraulic Power Unit - BENDER INCLUDED |
$5,140.00 |
Call To Order |
| |
 |
IS2-TSA-2-1-0006 |
|
Shark Pool Bender/Notcher Combo
Tube Shark Pneumatic/Hydraulic Tubing Bender and Electric Tube Shark Notcher Combo w/Cart |
$6,990.00 |
Call To Order |
| |
 |
IS2-MAC-060A |
 |
060 Super Bender - Machine Only
Ercolina 060 Super Bender - Machine Only Bend Round or Square with Proper Tooling up to 180 Degrees |
$7,900.00 |
Call To Order |
| |
|
IS2-MAC-OK60T |
|
060 Super Bender "Racer's Kit"
Ercolina 060 Super Bender w/"Racer's Kit" (Large Radius Tube Kit) This kit includes everything necessary to build everything required for a race car chassis. |
$10,200.00 |
Call To Order |
| |
 |
IS2-MAC-030 |
|
030 Mega Bender - Machine Only
Ercolina 030 Mega Bender - Machine Only Bend Round or Square with Proper Tooling up to 180 Degrees |
$16,500.00 |
Call To Order |
| |
|
IS2-MAC-OK30T |
|
030 Mega Bender "Racer's Kit"
Ercolina 030 Mega Bender w/"Racer's Kit" (Large Radius Tube Kit) This kit includes everything necessary to build everything required for a race car chassis. |
$20,000.00 |
Call To Order |
