Mittler Brothers Punch and Bead Sets for Bench Presses. Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, beaded hole in one easy step.
Mittler Brothers Automotive Punch and Flare Sets. Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step.
1" Punch and Flare. Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Can also be used as a hole punch.
1-1/4" Punch and Flare. Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Can also be used as a hole punch.
Mittler Brothers Aircraft Punch & Flare Sets. Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step.
1-1/2" Punch and Flare. Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Can also be used as a hole punch.
1-3/4" Punch and Flare. Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Can also be used as a hole punch.
2" Punch and Flare. Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Can also be used as a hole punch.
2-1/2" Punch and Flare. Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Can also be used as a hole punch.
3" Punch and Flare. Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt for a smooth, flared hole in one easy step. Can also be used as a hole punch.
This punch press operation is a cost-effective way to produce a flat tube end for tubular assemblies. This tooling is for flattening the tube in one motion.
Cart Contents:
