Racing & Metal
Fabrication Equipment
Call Today:


Log In

E-Mail Address:

Secure Log In
Password Forgotten?

Recently Viewed


Williams Lowbuck 2-TN Tubing Notcher - No. 2 - 1 1/4 in to 1 7/8 in

Williams Lowbuck

Item #  LOW-2-TN
MPN :   2-TN
Condition:    New

Your Price: $399.00

Be the first to review this item

Product Details

No. 2 - 1 1/4 in - 1 7/8 in Notcher

 The Williams Lowbuck Tubing Notcher is a must for any shop working with round tubing.  In less than six seconds  you can fishmouth the end of a tube so it can be perfectly butted with another for welding.  Cuts are clean and precise, requiring no grinding and guesswork.  With this notcher you aren't working with a hot piece of tubing and you won't be dancing around with hot sparks in your shoes or eyes.

Notchers are available with 4 sizes of cutters. Each size will notch various diameters of tubing (such as 1-inch up to 1 1/4 inch)  without changing cutters.By swapping interchangeable cutters, one notcher will handle tubing from 1 inch up to 2 1/2 inches.  For 90° joints, take a full bite from each side of the tubing.  For angles down to 60°, take a large bite from one side and a small bit from the other.  For joints less than 60°, cut the tube at an angle and notch the sharp end only.

These notchers are made of top quality materials and are designed to last a lifetime.  The cutting edges are case hardened to 62 Rockwell, which is 2 points harder than the back of Superman's head, so they need no resharpening.  The unit comes cad plated, fully assembled, and is designed to bolt to the side of your workbench. Extra interchangeable cutters are available.  

They will notch .125 wall mild steel or 4130 and up to and including schedule 40 pipe.

Tubing notchers
#1 - 1" to 1 1/4" -
#2 - 1 1/4" to 1 7/8"
#3 - 2" to 2 1/2" fence pipe notcher including schedule 40
#4 - 1 3/8", 1 5/8", 1 7/8" fence pipe notcher, including schedule 40


We Also Recommend :

Customers who bought this product also purchased